POLY HOUSE

POLY HOUSE

Poly houses are framed structures covered with transparent or translucent material large enough to grow crops under partial or fully controlled environmental conditions to get optimum growth and productivity. There
are several types of Greenhouses i.e. Naturally Ventilated Greenhouse, Forced Ventilated Greenhouse, Shadenet House etc.

We, Krishna Innovations Pvt.Ltd. are engaged in fabrication and erection of Naturally Ventilated Greenhouse. The Naturally ventilated Greenhouse was designed to meet the growing needs of farmers around the
world to produce higher quality crops thus enhance the return. This naturally ventilated Greenhouse is designed to solve the problem of ventilation anti humidity and is especially suited for hot and humid weather conditions.

Our Naturally Ventilated Greenhouse having vents at Top and at Sides. It exchanges air arising from the density difference of hot and cold air through air vents. Air exchange rates are very low and much dependent on the
temperature difference between internal and ambient air These greenhouses mainly rely on the wind pressure generated from one side and released from another side. In Naturally Ventilated Greenhouse, The Open Top Roof
vents allows continues air flow to rescue the inside temperature the optimum level. The Open roof has wide anti-rain overlap, Protecting Crop from inflow of Rain. The Open Roof can also be made fully insect-proof by fixing an
additional screen of insect Netting.

We Provide Fully hot Dip Galvanized Structure covered with 200 micron polyethylene film. Our All components are prefabricated and there is no welding at site. We provide Hot Dip galvanized Industrial Press
Gutter and Hot Dip galvanized plate clamps which ensure long lite of Structure. Our Structure design is in such a manner that it withstands against the wind load of 150 Km/hour. It proves our structure stability.

Structure Technical Data

Particular Specifications
Products Naturally Ventilated Greenhouse
Bay Size 8-10 Meter (Span) x 4-5 Meter (Bay)
Top Height 6-7 Meter
Top Vent 1-1.5 Meter Opening fixed with 40 mesh Insect net
Gutter Height 3-5 meter trom Floor Area
Gutter Slop 2% or as per requirement
Gutter Frame Industrial Press Gutter made from GI Coil of 500mm Width
Gutter Clamp Made From Hot Dip Galvanized Sheet of 2.5mm Thickness
Hockey 2.5 Meter
Trellising Load up to 25 Kg/m2